You can select from our regular sizing (S,M,L,XL,XXL) or you can provide your own measurements and have your sport coat made to your measurements.
1. REGULAR SIZING
PatrickMoorsport coats are designed to have a comfortable fit.
| S (small) | - this is approximately 38Reg |
| M(medium) | - this is approximately 40Reg |
| L(large) | - this is approximately 44Reg |
| XL(extra large) | - this is approximately 46Reg |
| XXL(extra,extra large) | - this is approximately 50Reg |
Sizing Chart
| S | M | L | XL | XXL | ||||||
| in | cm | in | cm | in | cm | in | cm | in | cm | |
| Shoulders- see diagram | 19 | 48 | 19.5 | 49.5 | 20.5 | 52 | 21 | 53 | 21.5 | 54.5 |
| Chest- see diagram | 21.5 (43) | 54.5 | 22.5 (45) | 57 | 23.5 (47) | 59.5 | 24.5 (49) | 62 | 25.5 (51) | 65 |
| Sleeves- see diagram | 23 | 58.5 | 24 | 61 | 25 | 63.5 | 26 | 66 | 26.5 | 67.5 |
| Length- see diagram | 29 | 73.5 | 30 | 76 | 31.5 | 80 | 32 | 81.5 | 32.5 | 52.5 |
 |
 |
 |
 |
 |
 |
 |
Alterations
PatrickMoor sport coats have been designed so that minor alterations can be easily made. The sleeves and length can be adjusted by approximately 3 cm. Because of the straight cut of the sides it is also possible to make adjustments to the shoulders and width of the sport coat.
2. MADE TO MEASURE
Getting started
- select a sport coat you already own which fits you really well
- use a tape measure- NOT a ruler
1. Measurements taken from your sport coat (PLEASE LOOK CAREFULLY AT THE DIAGRAMS)
Shoulders:
- lay your coat face down on a smooth surface
- measure where the shoulder and sleeve seams join, from one side to the other
Half Shoulders
- measure along the seam from the shoulder to where the seam meets the neck
Length
- measure down the back seam from where the back seam meets the bottom of the collar to the bottom of the coat
- it will be easier to do this measure if someone holds the coat upright
Sleeve
- measure from the point of the shoulder to the bottom of the sleeve
- it will be easier to do this measure if someone holds the coat upright
Chest
- lay the sport coat on a flat surface, facing up
- measure right across the chest, holding the tape 1 cm. under each armpit
2. Measurements taken from your body (PLEASE LOOK CAREFULLY AT THE DIAGRAMS)
Waist
- hold the tape right around your waist (where your belt sits). Make sure it is straight
- leave enough space on the tape to fit one finger between your waist and the tape
Hips
- measure right around the widest part of your hips. Make sure the tape is straight
- leave enough space on the tape to fit one finger between your body and the tape
NOTE:
To ensure the measurements are accurate
- take the measurements 2 or 3 times to make sure they are correct
- ask someone else to take the measurements, to see if they agree with your measurements
